字典APP>英语词典>UTS翻译和用法

UTS

abbr.  抗张强度极限;拉力强度(极限)(Ultimate Tensile Strength); 水下电话系统(Underwater Telephone System); 统一传输系统(Unified Transfer System)

计算机

双语例句

  • In addition, the mechanical properties ( including the UTS value and microhardness) of the welded joints decreased compared to the welded joint without flux.
    涂覆活性剂后,焊接接头的力学性能(包括极限抗拉强度和硬度)降低。
  • Objective To discuss the concept of ulnar tunnel at the wrist, the types, causes, traits of compression, diagnosis, and clinical significance of ulnar tunnel syndrome ( UTS).
    目的探讨腕尺管的概念,腕尺管综合征的分型、病因、卡压特点、诊断及其临床意义。
  • Compared with peak aging alloys, the ultimate tensile strength ( UTS) of two-step aging alloys reduced by about 13%, but UTS of regression-reaging treated alloys excelled that of peak aging alloys.
    同时发现,双级时效合金的抗拉强度比峰时效合金的强度下降了13%左右,而回归再时效合金的强度优于峰时效合金的强度。
  • It is feasible to forecast the casting UTS by measuring DAS, but the effect of hole ratio on UTS should not be neglected.
    通过测定二次枝晶间距来预测铸件的抗拉性能是可行的,但是孔洞率对抗拉强度的影响不可忽视。
  • The results show that the addition of Y and Zn improves YTS values but decreases the UTS and elongation values of as-cast alloys.
    结果表明:Y、Zn元素提高了合金的屈服强度但降低了抗拉强度和延伸率。
  • , and YS ( yield strength) and the value of YS/ UTS increase through the followed artificial ageing with obvious loss of elongation.
    而其后的人工时效处理能明显提高合金的屈服强度和屈强比,但也明显降低了延伸率。
  • It is shown that the ultimate tensile strength ( UTS) torsion failure life ( TEL) and reverse bending failure life ( RBFL) are decreased obviously as the consequences of the zincing.
    研究结果表明,热镀锌使双相钢冷拔钢丝的抗拉强度、扭转寿命和弯曲寿命降低。
  • Inspiration of Teaching Methods on Course of Initiatory Architectural from UTS
    悉尼科技大学建筑初步课教学方法启示
  • Conclusion Defining the concept of ulnar tunnel and the knowledge of the complexity and rarity of UTS can effectively guide diagnosis and treatment.
    结论明确腕尺管的概念、腕尺管综合征的少见及复杂性,可以有效指导临床诊断和治疗。
  • The output parameters of the model are three mechanical properties namely ultimate tensile strength ( UTS), yield strength ( YS) and elongation ( ELO).
    模型的输出为三个力学性能指标,即抗拉强度、屈服强度和延伸率。